Kent Armstrong Slimbucker Jazz Guitar Pickup Neck Mount

+ CN¥73.99 送货

Kent Armstrong Slimbucker Jazz Guitar Pickup Neck Mount

Black CoverChrome CoverGold Cover
价格: CN¥649.00
CN¥649.00 + CN¥73.99 送货


在 2 天内发货



ALNICO / D.C. =8K Kent Armstrong, has long been the best Jazz pick-up designer in the industry. This time he has really outdone himself This Humbucking pick-up is only 3/8", thick but sacrifices nothing in terms of sound quality of the full rich sound that players have come to expect of such a pick-up. Don't worry about getting a pick-up to fit under the strings again The Slimbucker Pickup from Kent Armstrong is intended for mounting to the end of a guitar's fingerboard. The two mounting tabs wrap around the outside of the fingerboard and the pickup is attached with the four screws. Once you have the tabs properly profiled to fit the neck, mark the four mounting tab holes on the edges of the neck and drill 1/16" pilot holes for the screws. The tabs can be bent with pliers to match your fingerboard's width and profile. Wrap the jaws of the pliers with electrical tape to protect the pickup. You may also find it necessary to "tweak" the angle of the mounting tabs relative to the face of the pickup. This will insure that the pickup is parallel to the stings. When bending the tabs, grasp them near the pickup housing and gently bend them the desired amount. Try to avoid re-bending.There are two solder lugs on the bottom of the pickup ready for your wiring. We recommend purchasing our Gibson braided wire. The lug closest to the mounting tabs is the ground or shield lug, and it should be wired to the Gibson wire's outer braid. The inner conductor of the wire will connect to the inner or hot lug. You can run the pickup straight into output endpin jack, or you may choose to use onboard volume and tone controls. These controls can be mounted to the instrument's pickguard, or into holes drilled into the face of the guitar. 500k for brighter tone, 250k for warmer tone. Important measurements -Overall size - 69mm x 29mm (excluding mounting bracket). Depth 9mm / 11.5mm depth including solder tags.Bar magnet length - 58mm.Distance between the two mounting bracket legs - 58mm.Mounting bracket length of leg - 25mm
  • Fruugo ID: 39486753-81170724
  • EAN: 7426810000000
  • 由……售出: WD Music UK

配送 & 退货

产品由 Fruugo 的各个零售商发货,它们分布于欧洲及世界其他地方。配送时间和送货费用会因为零售商的位置、目的国和所选配送方式而有所不同。 查看完整的配送信息

在 2 天内发货

标准配送 周四 16 十二月 2021–周三 29 十二月 2021 期间送达 · CN¥73.99

从 英国 送货。

我们会争取将您订购的产品按照您的规格完整地配送给您。不过,万一您收到不完整的订单,或收到的产品与您订购的不同,或者有其他原因让您对订单不满意,您可以要求全部或部分退货,您将收到相应产品的全额退款。 查看完整的退货政策.

WD Music UK

地址: Woodreeve Farm, Capel Road, Ashford, TN26 2EJ, 英国
零售商增值税登记号: GB403175586
公司编号: GB403175586