1 Pc Automatic Water Level Control Valve Tank Tower Ball Valve Floating

199,00 CN¥
+ 51,99 CN¥ Livraison

1 Pc Automatic Water Level Control Valve Tank Tower Ball Valve Floating

  • Marque: Unbranded

1 Pc Automatic Water Level Control Valve Tank Tower Ball Valve Floating

  • Marque: Unbranded
Prix de vente conseillé : 239,00 CN¥
Prix : 199,00 CN¥
Vous économisez : 40,00 CN¥ (16%)
Verkocht door:
199,00 CN¥
+ 51,99 CN¥ Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

This valve is a replacement for the traditional float, which can be used for various high water water systems, swimming pools, water towers of industry and civil construction, etc. Automatic control, low self-replenishing water, water fully automatic stop Four inlets, large water volume Beautiful appearance, small size, practical, simple installation No electricity, easy to use, long service life, low failure rate, saving water resources Working pressure range: 0.2-10kg Application Medium: water cleaning Suitable temperature Medium: le; 70° High temperature resistance average temperature: 70° - 120° When the pool level or water tank drops, the valve body will fall, and then the control valve precursor will be opened. Because it affects the water pressure in the pipe, the sealing surface of the control valve will be opened. Finally, the water comes out and vice versa. Note: This production belongs to liquid level control valves. Once installed, the float must be vertical. If you want to install from the top, the elbow needed to connect the float valve and inlet pipe. Firstly, the supply line should be fixed in the horizontal plane, and then connect an automatic valve to adjust the water level at the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valves. The ball valve should be open when in use. If two valves are installed in the same pool, the two valves should be kept in the same horizontal plane. Before installation, clean the debris in the pipes in case of blockage. If the water quality is not good, the valves must be properly maintained. If users find that the time of adding water becomes longer, they can just load the water inlet and wash it Material: Nylon PA66 + Food Grade Rubber Size: 72x50x70mm Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. Pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 x Water Level Control Valve
  • Identifiant Fruugo: 397921268-848422675
  • EAN: 6935170016923

Livraison & retours

Expédition dans un délai de 5 jours

  • STANDARD: 51,99 CN¥ - Livraison entre mer. 05 novembre 2025–mer. 19 novembre 2025

Expédition de Pays-Bas.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com