Feature:* .* Made of material, and practical to use.* Low odor, high transparency.* High bonding strength, low viscosity and easy venting.* Easy to use.* 220-260nm light source helps to cure the surface.* Used in bonding large area crystal glass.* Used in large area of glass-crystal-metal-acrylic-plastic special. Specifications:Type: 3068Shelf Life: 12 Months Material: Polyurethane AcrylatesCapacity: (Optional) 10g/50gViscosity (MP A.S): 3000Curing Time (25°C): depends on UV intensityTensile strength: 21-24MPa (approx)Instructions for use:When using, please use 365 wavelengths, 40W or more ultraviolet light for ten seconds to cure. (basic body 15S, long, single-color, 24S)Use Steps:1. According to the surface treatment of the material, the surface dry and clean, without weak boundary layer.2. Interface adhesive adhesive material for the need of continuous coating, be careful not to scatter.3. Glue positioning light in short ultraviolet light curing lamp until hand fixing.4. Full curing time high radiation, until fully cured, please note that the temperature is not too high.5. Dipped in acetone, alcohol, cleaning materials with a cloth or paper towel and gently wipe off the bonding of a good material. Package Included:1 X UV1 Glue Small LampPlease Note:-Our glue is half bottled, because glue is a chemical liquid, firstly, it shakes in express transportation, it is easy to break and leak if it is overfilled.-Secondly, due to thermal expansion and contraction, it is easy to cause safety accidents, so the packaging bottle has reserved capacity.-Due to the difference between different monitors, the picture may not reflect the actual color Item. Thank you!-Manual measurement, please allow 1-3cm error. Thank you for your understanding.