Keeping safe on a worksite, or attracting attention to your vehicle at an event - whatever your purpose - this multi-pattern strobe is versatile and couldn't be easier to install. Two strong magnets hold it firmly in place on your roof and a curly-cable to cigarette lighter plug means you can power it without any special wiring. Inside the protective plastic case are 24 high power amber LEDs - 6 banks of 4LEDs each to be precise. There are 10 different display patterns, so you can select the most attention-grabbing one for your situation. Modes include clockwise / anticlockwise rotation, side to side, fade in/out, and more. Two rubber feet on the bottom of the unit cover powerful magnets and protect your paintwork. If you prefer to mount it permanently however, they unscrew for a clean, flush mount. The cigarette lighter plug incorporates an on/off switch with LED power indicator, as well as a switch for selecting the display mode. Of course, please make yourself aware of any local laws for using external lighting on vehicles, on and off public roads. IP Rating : IP56 Dust/Particle Ingress Protection : 5 - Dust protected, protected but some dust may enter Liquid/Moisture Ingress Protection : 6 - Powerful water jets LED Power : 1.0W LED Quantity : 24.0pc Outdoor Light Type : Emergency Beacon Width : 280.0mm Height : 62.0mm Depth : 165.0mm Required Voltage : 12.0V, 24.0V Vehicle Connection : Cigarette Lighter Lead Included : true Lead Length : 1.0m Mount Location : Roof Removable : Easily Removable Mount Method : Magnetic