Santa Claus 5D DIY Special Shaped Diamond Painting Greeting Card Part Drills Christmas Birthday Christmas Diamond Handmade Cards Embroidery SetsSpecification: High Quality Resin Diamond + Cardboard Diamond Type: Special Diamond Shape Part DrillProduct Size: 15X15cm/5.91X5.91" (When folded greeting card in half)Package Size: 300X150X30mm/11.81X5.91X1.18"Product Weight: 230gPattern: HK102DIY Diamond Steps paintings:1. Open the box and check the special diamond painting tools.2. Check the color of the resin diamonds and arrange them in the coding order.3. Look for the tape image above, you will see many symbols corresponding to the color coding.4. Inlay diamonds according to the corresponding resin of the corresponding color-coded device.5. It is recommended to complete the Resin Diamond set faster.6. To get a perfect diamond image, place the drawing in one place and you don't need to leave diamonds in each line of symbols.7. To cut out a good figure in the drawing, install a sorting board on the plane of the above material.8. The joint must be flat, neat and without cracks.9. After a good roller, the remaining glue gaps are consistent with the diamond symbol. Note:1. This is diamond painting. It's not finished. You have to do it yourself.2. Due to the different monitor and light effect, the actual color of the item may be slightly different from the color showed on the pictures. Thank you!3. Please allow 1-2cm measurement deviation due to manual measurement.8 X Diamond Cardboard8 X Greeting Card Envelope1 X Diamond Drawing Tools (Jelly Glue, Drill Bit, Acceleration Plate, Drill Bag) [Relateproductdetail/]