Straight 180 Degree Door Hinge designed to support a variety of large door materials and panels via 2 fixed mounting bolts per side. Can be opened inward or outward depending on fitting requirements. What's included - The satin nickel zinc alloy 180 degree glass hinge - Allen key - Gasket padding (which will come already inside the hinge) - Glass cut out measurements tech sheet (please see the glass cut out in the image section)Self closing when door is open approximately 30 degreeUseful Information Regarding this Glass HingeGlass Thickness: 6 - 8mmGlass Requirements: glass cut-out requiredMaterial: Stainless SteelFinish: Satin NickelWeight Limit and Maximum Glass Panel Size: The maximum weight limit per hinge is 25kg. We recommend that this weight limit is adhered to and considered when deciding how many hinges are being used per panel. Typical usage for most panels and doors is 2 -3 hinges per side. The maximum width of the glass door should be no more than 700mm.Door Opening Function: This hinge has dual action springs which means that the door will open 90° outwards and 90° inwards., opening both inwards and outwards (90° in and 90° out).Door Closing Function: Self-closing from approximately 15-20 degrees Manufactured from a stainless steel coated in a polished zinc alloy, this heavyweight high quality fixture can be fitted in most environments including the bathroom and kitchen. Typically fitted directly to a glass door via two mounting bolts included on both sides of the bracket. Please ensure that you have two mounting holes per side - Refer to the technical diagram for more information.Typically used in pairs.Sold individually.