This innovative device is ideal for network installers or technicians and will allow the user to easily check cable integrity or measure AC & DC voltage, current, resistance, and continuity etc. without needing to carry two separate devices. The unit will check for cable continuity, open-circuits, short-circuits, and cross-connects etc. A remote terminator is included and enables the user to check network cables at a wall jack or patch panel. Supplied with loop back cable, LAN terminator, and multimeter leads. LAN tester specifications: LAN tester checks faults & miss wired conductors Manual or automatic testing Continuity buzzer : true AC Current Ranges : 2.0mA, 20.0mA, 200.0A AC Current Accuracy : 2.0% DC Current Ranges : 2.0mA, 20.0mA, 200.0mA DC Current Accuracy : 1.5% Resistance Ranges : 200.0Ohm, 2.0Kiloohm, 20.0Kiloohm, 200.0Kiloohm Resistance Accuracy : 0.8% Measures in Celcius : false Measures in Fahrenheit : false Measures in Kelvin : false AC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V AC Voltage Accuracy : 1.2% DC Voltage Ranges : 200.0mV, 2.0V, 20.0V, 200.0V, 600.0V DC Voltage Accuracy : 0.5% Records Minimum : false Records Maximum : true Data Hold : true Relative Measure : false Display Type : LCD DMM Control from PC : false Safety Rating Cat : Cat III Safety Rating Max Volt : 600.0V Count / Maximum Reading : 3.0pc True RMS : false Autorange : true Optical Sensor : false Measures duty cycle : false Measures dwell : false Length : 162.0mm Width : 74.5mm Depth : 44.0mm Probe Type : High Grade Meter Probes Connection to meter : Shrouded 4mm Banana Plug Meter Input Impedence : 10.0Megaohm Input Protection Fuse : 200.0mA Measures diode : true