2x Natural Nylon PA66 M4 x 500 mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: Pack of 2 threaded rods. Colour: Natural. Material: Nylon / Polyamide 66. Length: 500mm. Diameter: 4mm. Pitch: 0.7mm. 4 nuts included (2 per rod). SKU: 966.. BP2: PA66 balances toughness and abrasion resistance in a slim M4 format, giving a practical non-metal thread for light mechanical work.. BP3: Moisture note — nylon can absorb some moisture, so check thread fit and dimensions if the part will be used in damp conditions.. BP4: The 500 mm length gives usable stock for trimming into smaller threaded sections with suitable cutting tools.. BP5: Use for cut-to-length spacers, light guide rods and small fixture positions that need the slimmer M4 thread, with careful tightening and checks for plastic-thread suitability. Also known as studding, allthread, threaded bar.. || PRODUCT DESCRIPTION SUMMARY: These M4 x 500 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with good wear resistance. This size suits cut-to-length spacers, light guide rods and small fixtures requiring an M4 thread. Nylon can absorb moisture, so check thread fit and dimensional tolerance in damp or changing environments. Cut with suitable tools, avoid over-tightening the plastic thread and confirm material suitability before final use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M4 x 500mm. Colour_Ref: Natural. Material_Ref: Nylon / Polyamide 66. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 4 x 4. || Additional Specifications: Pitch_MM: 0.7. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Nylon Polyamide 66, Head/Drive Type: Fully Threaded Rod, size: M4 x 500, D: 4 mm, Pitch: 0.7 mm, L: 500 mm