Details:* * Replacement iron drill bit for Hakko 936 station, for 900M.933.376.907.913.951,898D,852D +* Lead-free paints environmentally friendly soldering iron drill bit, high temperature resistance, more suitable for lead-free soldering with high melting point* Type B: (conical):Features: Type B iron solder drill bit is non-directional, the whole tip of the soldering iron can be welded. Applications: suitable for general welding, regardless of the size of the solder joints, type B soldering iron can also be used.* Type C (Bevel Cylindrical):Features: welding with the beveled part of the soldering iron tip tip, suitable for welding with a large amount of tin. Scope of application: suitable for welding machine which requires many quantities of tin, such as welding area with large welding area, thick clamp and large welding pad.* K Type (Blade Shape):Features: application blade type of welding parts, vertical or pull welded welding can be multi-functional ends. Applications: suitable for SOJ. PLCC. SOP. QFP. Power supply, grounding components, tin bridges, connectors, etc.* Maintenance tips:1: try using low-temperature solderingHigh temperature will accelerate the oxidation of the tip and reduce the life of the terminal. If the tip temperature is above 470 ° C, its oxidation rate is twice that of 380 ° C.2: do not apply too much pressureWhen welding, do not apply too much pressure, otherwise the tip will be damaged and deformed. As long as the tip can fully the solder joint, heat can be transferred. Also, choose the right tip to help with heat transfer.3: always keep the can on the iron headThis can reduce the oxidation risk of soldering iron drill and make the cast iron soldering head more . After use, add new solder after slightly reducing the soldering temperature of the iron drill, so that the tinning layer has a better anti-oxidation effect.4: keep the tip clean and clean the oxide immediatelyIf there is black oxide iron drill on the soldering, the iron solder drill may not be tinned. During this time, it should be cleaned immediately. During cleaning, the first time adjusting the temperature of the soldering iron drill to about 250 °C, then clean the soldering iron drill bit with a sponge to clean and then on. Tin. Repeat the operation until the oxide is purified.5: choose a low-activity fluxHighly active or corrosive jets accelerate the corrosion of the soldering iron when heated, so use low-corrosion jets.* Color: Black (as pictures show)* Material: Metal * Optional Type: 900M-T-SI,900M-T-B,900M-T-I,900M-T-K,900M-T-2.4D,900M-T-1C (As pictures show)*Diameter: 5mm (Approx.) Package Contents:5*Soldering TipsNote:Actual colors of the item may slightly different from the pictures shown on the website due to many factors such as monitor brightness and light brightness.