CT-90 is specially formulated cutting - tapping - reaming and drilling lubricant fluid which will not breakdown under extreme pressure. A coating of CT-90 cutting and tapping fluid will allow swarf and cut chips of metal to be removed by the cutting tool with less friction. CT-90 cutting and tapping fluid requires less effort when cutting is required for even the hardest metals. CT-90 improves the surface finish and cutting times are reduced.CT-90 cutting and tapping fluid has been formulated to be suitable for all types of steels and ceramics - even high tensile steels. Due to the active nature of this product there is a risk of staining if the product is used on some yellow metals. CT-90 cutting and tapping fluid will not mix with water; it can be removed with all common industrial degreasers and solvent cleaners. Apply CT-90 cutting and tapping fluid during the drilling operation. CT-90 cutting and tapping fluid will increase drilling efficiency and prolong drill bit life. Take with moving parts. During thread cutting apply CT-90 cutting and tapping fluid to the die or tap. It is suitable for both machine and hand operation; it can be used while threading pipe work to reduce the risk of thread wall deformation. Apply CT-90 to hacksaw blade before and during the sawing operation; CT-90 cutting and tapping in compound is suitable for dipping or brushing application. CT-90 is silicone free. Key Features Drilling - Sawing and Thread Cutting Simplified Safe on Steels - Copper - Brass - Stainless Steel and Ceramics Extends Tool Life High rates of metal removal High anti-weld features Silicone and CFCs Free Reduces heat and improves surface finish Non-drip compound can for brush application for dipping small cutting tool