MP100 Multi Purpose Spray Adhesive is a fast drying - strong adhesive. ADVANTAGES Original Formulation Fast Tack Ideal where instant contact and bonding is required Provides high-strength permanent bonds Variable actuator for maximum control and economy APPLICATIONS MP100 Multi Purpose Spray Adhesive will provide quick - strong bonds in many areas; Carpets & Flooring Chipboard and Concrete Insulation Materials Canvas and Leather Paper Wood and Cork Metal Plastics and Rubber Apply an even coating to both surfaces to be bonded from 9 12 inches (25 30cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. NB. May affect certain plastics. Always test a small -inconspicuous area before general use. To prevent blockages invert the can after use and spray clear the nozzle. TECHNICAL DATA Appearance : Thick - gelatinous film Odour : Ethereal/Solvent SG @ 25OC : 1.16 Pressure @ 25OC : 4 bar Discharge rate : 1.4g/sec Polymer Type : Styrene butadiene rubber Tack Time : Approximately 30 seconds Bonding Time : Maximum adhesion in 12 - 24 hours Temperature Range : Up to 50OC (dried film) Solubility : Soluble in some solvents - insoluble in water Flammability : Classified as extremely flammable under the EC Classification - Labelling and Packaging regulation (CLP) 1272/2008 Packaging : 500ml aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.