This listing is for 6 piece/s.CCL 100 is a highly efficient switch and contact cleaner. It offers a combination of high purity electrical cleaning and mechanical lubrication for contacts - switches and relays. APPLICATIONS Removes: Grease Tarnish Oxidisation and other contamination from contact surfaces Leaves a protective conductive lubricating film Cuts voltage drop between contacts by increasing the surface area and reducing resistance. The residual film resists drying and the attraction of dust. Eliminates contact bounce and stops the damage which can be caused by arcing between contacts. Improves the current flow and protects against friction. Apply directly onto the components to be treated. Do not use on live electrical equipment. After spraying always leave for at least 4/5 minutes to allow dispersal of solvent vapours - before operating the equipment. TECHNICAL DATA Appearance : Clear liquid Odour : Solvent SG @ 25OC : 0.7 Pressure @ 25OC : 3.5 Bar Discharge Rate : 0.93 g/sec Temperature Range : Operational up to 150OC Solubility : Soluble in hydrocarbon solvents - insoluble in water Recommended Solvents : Aeroklene 50 or Coldklene 110 Flammability : Classified as extremely flammable under CHIP Regulations Flashpoint : Not applicable in sealed aerosol Packaging : 400ml aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame. Pack of 6