APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. Design PDU types: Metered, Switched Rack capacity: 0U Mounting: Vertical Product colour: Black Ports & interfaces AC outlets quantity: 24 AC outlet(s) AC outlet types: C13 coupler, C19 coupler Features Cable length: 1.83 m Certification: EN 55022 A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC 15 A, ICES-003, UL, VDE Management features Monitoring: Current, Power, Voltage Outlet control: Lock-out, Recycle, Turn off, Turn on Power Nominal input voltage: 400 V AC input frequency: 50 - 60 Hz Maximum current: 16 A Nominal output voltage: 230 V Load capacity: 11040 VA Maximum input current per phase: 16 A Maximum total current draw per phase: 16 A Maximum power: 11040 W Weight & dimensions Dimensions (WxDxH): 56 x 51 x 1829 mm Weight: 8.23 kg Packaging data Package dimensions (WxDxH): 162 x 117 x 2038 mm Package weight: 10.5 kg Operational conditions Operating temperature (T-T): -5 - 45 degrees C Operating relat