Let the self-adjusting blade for fine materials and fabrics SDX (CADXBLDQ1) ScanNCut from Brother handle difficult cuts The maximum thickness of your materials should not exceed 3 mm. This article is only suitable for ScanNCut SDX1000 and SDX1200. This blade is for use with the corresponding cutting blade holder. This Brother ScanNCut SDX self-adjusting cutting blade can cut a wide variety of materials such as fabrics, cork, foam, papers. Cutting will be done with several passes if your material requires it. The machine's sensors automatically calculate the thickness of the material and adjust the cutting parameters without any intervention on your part. The Brother ScanNCut DX 1200 Cutting Machine allows you to cut, sketch or emboss your own designs with its unique scan function It will be indispensable to you in your creations of creative or professional hobbies. This machine is very quiet, autonomous (no computer or software), revolutionary and versatile is equipped with a built-in scanner. It allows you to do direct cutting or half-cutting with an automatic blade adjustment. It allows to scan to a USB port in 600 DPI, the connection is wireless, you can easily edit your drawings. Convert your embroidery data without worries. Create and edit your designs on the large color touch screen, easily cut, draw or scan. Conversion of your SVG files is no longer necessary. Finally, cut out all the materials up to 3 mm thick and 30.5 x 30.5 cm on a support. The magazine (option) allows you to cut roll stickers without a cutting support to a width of 30.5 cm and a maximum length of 182 cm. It is equipped with a removable strip with a cutting blade to cut at the desired location. The setting of the cutting speed can be done automatically or manually, you can test it beforehand if you wish. This adjustment is done by detecting the thickness of your material that allows the adjustment of the cutting parameters without any intervention on your part. The cutting will be done