5LTS PACKAGINGNewly projected liquid polymer, with a large Flocculant power capable of eliminating colloidal particles found in the pool water and causing turbidity in the water.Ideal for: all types of pools.High coagulation speed and good decantation speed.Satisfactory behavior at low temperatures.Possibility of use in a wide range of pH.Less tendency to cause overdose phenomena.Eliminates metallic ions such as iron and manganese.Formation of easy filtering flakes.Lower aluminum content soluble in treated water.Elimination of organic matter.Effectiveness against high turbidity waters.Improves the bacteriological quality of water and consequently reduces the consumption of products used in disinfection. Recovery treatment: With the filtration equipment stopped and without the presence of swimmers in the pool, add 10 ml. Product by m3 of water. Say the necessary dose of the product in a container with water and distribute this solution on the pool surface. After 8 hours, the flake layer deposited at the bottom of the pool will be collected and removed. Treatment. Maintenance: Can be performed by means of a dose pump, injecting 0.5 ml before the filter. of product by m3 of water in circulation.Dosage ::Initial treatment: 1LT for every 100m3Maintenance Treatment: 0.5LT per 100m3FloculantPool water frequently loses its transparency condition when turbiding caused by:Presence of algae, bacteria, organic matter. Precipitation of calcium and magnesium salts. Dust introduced by the air or bathers. Wasseraufbereitung of iron salts and manganese.Rain mud, etc.In most of these cases, the particles introduced into the water are such a small (colloidal) size that they do not have sufficient size to be retained by the filtration equipment.CTX offers a complete range of Flocculants and coagulants to solve any turbidity problem in the pool water.BENEFITSThe use