DC 5-120V 100A Digital Voltmeter Current Voltage Meter In Hall Sensor

CN¥ 259,00
+ CN¥ 47,49 i frakt

DC 5-120V 100A Digital Voltmeter Current Voltage Meter In Hall Sensor

Solgt av:

CN¥ 259,00

Spar CN¥ 50,00 (16%)

Veiledende pris

CN¥ 309,00
På lager
+ CN¥ 47,49 i frakt

14-dagers returpolicy

Betalingsmåter:

  • Merke: Unbranded

Beskrivelse

DC 5-120V 100A Digital Voltmeter Current Voltage Meter In Hall Sensor

Features: OOTDTIC Through-Hole Instruction: No Difficulty Wiring. Measure the positive or negative current. There is no current restriction directionElectrically isolated from the high voltage power source, which eliminates the risk to delicate monitoring equipment and also minimizes safety concernsDisplay voltage or (+ -) current. Voltage range: 5V-120V. Current Range: 0-100A Wire Usage Ability: Hole diameter, through the sensor is 3/4 inch (19mm)Loop through the sensor multiple times to amplify the signal. For example, if your current signal is only 0.2 amps, you can loop the wire through the sensor 10 times, and the signal will be 10X stronger and appear as 2.0 ampsDescription:The hall effect current meter reads the current by detecting the magnetic field around the wire, there is no electric u, which eliminates the risk of delicate monitoring equipment, and also minimizes safety concerns. The sensor does not heat up, such as a current shunt resistor, which can have thermal temperature heat dissipation problems. Three display modes:1. Alternate between amplifiers and voltage2. Display only amplifiers3. Display Voltage OnlySpecifications:Measuring Range: +-100A Accuracy: +-1%Resolution: 0.3A Working Current: 7-15mA Power Supply: DC 5-120V Product Dimensions: 48mm*29mm*23mm Mounting Hole: 45.5mm*25.5mm Sensor Hole Diameter: 19mm Operating Temperature: -4°f-140°F (-20°c-60°C)Since the resolution is 0.3A, the current reading may flicker with 0.3A difference. For example, if the current is 1.7a, you can see 1.7a and 2.0a alternatively. This is normal. If your signal is too weak or you're not getting the resolution you want, you can coil the wire through the current sensor as many times as you want to double, triple, or quadruple the sensitivity or resolution. For example, if the current signal is only 0.2 amps, you can loop the wire through the sensor 10 times and the signal will be about 10X stronger and will appear as 2.0 amps. Note: We have more detailed manual, if you need electronic user manual, please sit down. Package Included:1x Digital Voltmete Ammeter1x Hall Sensor
  • Fruugo-ID: 397933246-848440431
  • EAN: 6935170124277

Leveranse

Sendes i løpet av 5 dager

  • STANDARD: CN¥ 47,49 - Levering mellom kl fre. 04 september 2026–fre. 18 september 2026

Sendes fra Nederland.

Retur

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene.

Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • [email protected]

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • [email protected]