Some common jobs create high levels of dust. Exposure to these dusts can potentially cause serious health risks. The risk is generally higher for small particles invisible to the naked eye. Our powerful wet and dry ‘M’ class vacuum removes 99.9% of dust particles passing through its filter. Manufactured to fully comply with the ‘M’ class standard and fitted with an automatic filter cleaner that vibrates after use, maintaining 99.9% dust removal and filter permeability in line with HSE recommendations. See below for HSE recommendation details. Each vacuum is fitted with an auto start/stop 230V plug socket, which automatically switches off and on by use of the power tools on/off button. The low 68-decibel noise level, 35L capacity, powerful Amiteck motor and full bag indicator all unite to create a vacuum designed with the user in mind delivering a superior user experience. Supplied with the following; • Cartridge filter • Foam filter • Paper dust bag • 1 x 230V plug socket • 3M flexible hose with hand grip and air control • Two extension tubes • Floor brush • Carpet attachment with fluid insert • Crevice nozzle. HSE recommends M class vacuums for on-tool dust extraction, especially important when dust with crystalline silica is produced. It’s generally recommended as filtration for non-carcinogenic materials with occupational exposure levels greater than 0.1mg per cubed meter. These materials include wood dust, paint, plastics, metal, paper, textiles etc. For further details about protection against hazardous materials, visit http:/www.hse.gov.uk