Usage: The edge of the rough fabric can be decorated with strips of cloth presser foot, helps to make the edge width less than 7mm easily. Straight stitching, zigzag stitching, or decorative stitching can be used using the method:1. Before installing the presser foot, please extend the tap binding in the presser foot to ensure that the rolling groove of the presser foot is aligned.2. Pull out the binding straps from the back of the presser foot.3. Install the presser foot.4. Adjust the needle position until the needle point is on the edge of the boundary. Tip: If the needle cannot be adjusted to the correct position on the edge, you can loosen the screw pressure foot, adjust the extension to the faucet position and move. Applicable Model: XL2600/BM2600/XL5500/XL5600/BC2500/ES2400/NV30/NV400/NV1200/NV4000Specifications:Material: MetalSize: Approx. 5.5X2X1.5cm/2.16X0.78X0.59 inchWeight: Approx. 17gNotes:1. Due to the different monitor and light effect, the actual color of the item may be slightly different from the color showed on the pictures. Thank you!2. Please forgive the 1-3cm measurement deviation due to manual measurement.1 X Presser Foot