Product description:Highly effective special gel for the effortless removal of epoxy resin haze after grouting and cured epoxy resin stains indoors and outdoors. Excellent dissolving power for epoxy resin-based paving joint mortars (2-component joint compounds) as well as stubborn residues from synthetic resin or flex joints. Also ideally suited for the removal of resin residues, sealants, coatings, impregnations, oil and grease deposits, paints (graffiti), adhesives, plastic residues and much more. The stable gel formula enables an optimal exposure time and problem-free application on vertical surfaces.Application:for: Paving stones, cast stone, natural stone as well as all clinker and ceramic surfaces. Also ideal for removing sealants, impregnations, graffiti, paints, adhesives, resin, tar, oil and greaseProperties:Removes (2-component) epoxy resin grout, epoxy resin haze and residues of synthetic resin and flex joints Acid-free - can also be used on sensitive surfaces Ideal for paving stones, natural stones and tiles of all kindsInstructions for use:Always check material compatibility in an inconspicuous area before use. The processing or substrate temperature should be between +15 °C and +25 °C. Dried coarse residues must be mechanically removed in advance after heating. Apply the product undiluted to the dry layer to be removed (e.g. with an enclosed brush, roller or scrubbing brush) and leave on for approx. 10-15 minutes. Then clean the surface with warm water and a pad that is as rough as possible (e.g. green pad) or a brush. In the case of very stubborn (old) soiling, if necessary. extend the exposure time or repeat the process. Do not allow product to dry completely during the exposure phase. Cleaning should be carried out in sections if possible (maximum approx. 5 m² per operation). After the cleaning process, rinse with plenty of clear water so that dissolved epoxy resin residues do not re-deposit on the surface. Coverage: Approx. 15–20 m² / litre - depending on the soiling and absorbency of the surfaceManufacturer's ref.: H 110 250 001Package size: 1 litre tin canImportant information:Download "Safety Data Sheet" for this productLabelling according to Regulation (EC) No. 1272/2008 [CLP/GHS]Signal word: Hazard Hazard statements: H225 - Highly flammable liquid and vapour. H319 - Causes severe eye irritation Safety instructions: P101 - If medical advice is required, have packaging or label ready. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 - Wear protective gloves / protective clothing / eye protection / face protection. P305 + P351 + P338 - In case of contact with eyes: Rinse gently with water for a few minutes. Remove existing contact lenses if possible. Continue to rinse. P403 + P235 - Store in a well-ventilated place. Keep cool. P501 - Contents / container of municipal pollutants