Product description:Highly effective special gel for the removal of nitro-based, synthetic resin and acrylic-based spray paints, waterproof felt-tip pens and much more. The stable gel formula enables an optimal exposure time and problem-free application on vertical surfaces.Application:for: Concrete, natural stone, clinker, ceramics, highly absorbent mineral substrates, sensitive surfaces and materialsagainst: spray paint (nitro combin, synthetic resin and acrylic based), felt-tip pen (waterproof)Properties:Removes almost all commercially available spray paints based on nitro, synthetic resin and acrylic, waterproof felt-tip pens and much more. Stable gel formula – does not flow away – for an optimal exposure time on vertical surfaces 100% acid-free – can also be used on sensitive surfaces and materials Intensive depth effect – ideal for highly absorbent mineral substrates, such as concrete or sandstone Ideal for mineral substrates, such as concrete or clinkerInstructions for use:Always check material compatibility in an inconspicuous area before use. The processing or substrate temperature should be between +15 °C and +25 °C. Apply product undiluted to the dry layer to be removed (e.g. with the enclosed brush) and leave on for 10-15 minutes. Then clean the surface with warm water and a pad that is as rough as possible (e.g. green pad) or a brush. Repeat the process for very stubborn (old) dirt. Do not allow product to dry completely during the exposure phase. Cleaning should be carried out in sections if possible (maximum approx. 5 m² per operation). Do not use on solvent-sensitive surfaces (e.g. paints or plastics). In principle, this product should be tested for compatibility on a concealed area before use. In the event of improper handling, any liability for any damage expires. Store frost-free. Coverage: Approx. 15–20 m² / litre - depending on the soiling and absorbency of the surfaceManufacturer's ref.: H 110 260 001Package size: 1 litre tin canImportant information:Download "Safety Data Sheet" for this productLabelling according to Regulation (EC) No. 1272/2008 [CLP/GHS]Signal word: Hazard Hazard statements: H225 - Highly flammable liquid and vapour. H319 - Causes severe eye irritation Safety instructions: P101 - If medical advice is required, have packaging or label ready. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 - Wear protective gloves / protective clothing / eye protection / face protection. P305 + P351 + P338 - In case of contact with eyes: Rinse gently with water for a few minutes. Remove existing contact lenses if possible. Continue to rinse. P403 + P235 - Store in a well-ventilated place. Keep cool. P501 - Feed contents / container to municipal pollutant collection point.