HOTREGA® stone stain stop, 1 litre bottle

Product description: Solvent-free professional impregnating agent for absorbent natural and artificial stone. Application: For: oil, grease, dirt, moisture, algae, moss. Properties: Reduces the absorbency of the surface, thereby minimizing the penetration of oil, grease, dirt, and moisture. The surface remains breathable, staining is largely prevented, and cleaning is significantly easier (easy-care finish). Reduced moisture absorption protects against algae and moss growth. Solvent-free – for indoor and outdoor use. Instructions for use: The surface to be treated must be dry, clean, free of stains, and absorbent. Switch off any existing underfloor heating before application. The application temperature should be between +10°C and +25°C. Shake the bottle well before use. Apply liberally and evenly using a garden sprayer, spray bottle, foam roller, brush, sponge, or cloth. For polished surfaces, ensure even distribution by wiping several times. Treat only small sections of highly absorbent surfaces. Avoid puddles and drips or wipe them up immediately. Product residue must not be allowed to dry on the surface; therefore, completely wipe off any excess before it dries. If necessary, moisten the cloth with isopropanol or similar. This is important for surfaces with uneven absorbency. For particularly absorbent surfaces (e.g., sandstone), repeat the process after approximately 10 minutes (working wet-on-wet). Full effectiveness is achieved after approximately 48 hours. If the effect diminishes, the surface can be treated again. Heavily used surfaces, such as kitchen countertops, vanity tops, etc., should be treated annually. Store in a frost-free, cool, and sealed container. Use the product undiluted only. Certain materials may appear darker after treatment. Low-absorption horizontal surfaces should generally not be treated using a spray application. Do not apply in strong sunlight or rain. Immediately wipe off any splashes on wood, glass, PVC, painted surfaces, and permanently elastic joints with a damp cloth. Clean tools with water. Free of organic solvents. As a general rule, this product should be tested for compatibility on an inconspicuous area before use. Any liability for damage resulting from improper handling is excluded. Coverage: approx. 6-20 m²/L Manufacturer's article number: H 120 110 001 Package size: 1 liter bottle Important information: Download "Safety Data Sheet" for this product Labeling according to Regulation (EC) No. 1272/2008 [CLP/GHS] Safety instructions: P102 - Keep out of reach of children. EUH208 - Contains reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one [EC No. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC No. 220-239-6] (3:1). May produce an allergic reaction. EUH210 - Safety data sheet available on request. Use by non-professional users is permitted. This product information does not replace the instructions for use and is not exhaustive. Use the product with care. Always read the label and product information before use.