The RHP range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. RHP offers one of the most comprehensive ranges of angular contact ball bearings available. Single-Row Angular Contact Ball Bearings (Pressed Steel Cages & Machined Brass Cages) Since these bearings have a contact angle, they can sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two opposed bearings or a combination of more than two must be used. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required. Specifications Inner Diameter: 2.3/4in Outer Diameter: 6.1/4in Width: 1.3/8in