2x Natural Nylon PA66+GF M8 x 200mm Threaded Rods, Studding + 4 Nuts

BP1: 2x Threaded Rods. 4 nuts included. Material: 30% Glass-Fibre Reinforced Nylon Polyamide 66, PA66+GF. Length: 200mm. Diameter: 8mm. Pitch: 1.25mm. SKU: 983.. BP2: Made from 30% glass-fibre-reinforced nylon (PA66+GF), providing greater stiffness and dimensional stability than unfilled PA66.. BP3: Non-metallic nylon body with useful wear resistance for light-duty plastic-threaded assemblies.. BP4: Fully threaded from end to end, so compatible M8 nuts can be positioned along the available 200mm length.. BP5: Use for short reinforced spacers, enclosure spacing and compact threaded mounting points; cut carefully and check thread engagement before final use.. || PRODUCT DESCRIPTION SUMMARY: These natural M8 x 200 mm threaded rods are supplied as a pack of two and are made from 30% glass-fibre-reinforced nylon (PA66+GF). Each rod has a 8mm nominal diameter, 200mm length and 1.25mm pitch. The glass reinforcement gives a stiffer and more dimensionally stable plastic threaded bar than unfilled PA66, while still keeping the part non-metallic and easy to cut with suitable tools. This size is useful for short reinforced spacers, enclosure spacing and compact threaded mounting points, especially where a metal rod is unnecessary or undesirable. PA66+GF is harder and less flexible than plain nylon, so allow for careful cutting, clean thread engagement and suitability checks before final fitting. Use with compatible M8 nuts for light-duty spacing, alignment, mounting and general plastic-threaded assembly work. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M8 x 200mm. Colour_Ref: Natural. Material_Ref: Nylon PA 66 / 30% Glass Fibre Reinforced. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 8 x 8. || Additional Specifications: Pitch_MM: 1.25. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Nylon PA66 + 30% Glass Fibre Reinforced, Head/Drive Type: Fully Threaded Rod, size: M8 x 200, D: 8 mm, Pitch: 1.25 mm, L: 200 mm