BP1: 2x threaded rods. 4 nuts included. Material: Nylon Polyamide 66 / PA66. Colour: Natural. Size: M4 x 200 mm. Diameter: 4mm. Pitch: 0.7mm. SKU: 967.. BP2: Natural PA66 gives a compact, wear-resistant plastic thread for smaller assemblies that need repeated nut fitting without metal hardware.. BP3: Non-conductive plastic body — useful where a metal threaded component is not wanted in a small assembly.. BP4: The 200 mm length reduces waste where only a short plastic threaded section is needed.. BP5: Use for compact spacers, short enclosure fixings and close-coupled threaded points where a shorter rod is preferred, with careful tightening and checks for plastic-thread suitability.. || PRODUCT DESCRIPTION SUMMARY: These M4 x 200 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with useful wear resistance and good low-friction behaviour for nut fitting in light assemblies. This size is suited to compact spacers, short enclosure fixings and close-coupled threaded points where a shorter rod is preferred where a lighter non-metal rod is preferred. Nylon can absorb some moisture, so check thread fit and dimensional tolerance in damp or changing environments. Cut with suitable tools, avoid over-tightening the plastic thread and confirm material suitability before final use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M4 x 200mm. Colour_Ref: Natural. Material_Ref: Nylon / Polyamide 66. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 4 x 4. || Additional Specifications: Pitch_MM: 0.7. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07016-PA66Material: Nylon Polyamide 66Material Reference: PA66Head/Drive Type: Fully Threaded Rodsize: M4 x 200D: 4 mmPitch: 0.7 mmL: 200 mm