2x White PTFE M12 x 200 mm Threaded Rods — Short Plastic Studding

BP1: 2x fully threaded plastic rods. 4 nuts included. Material: PTFE / polytetrafluoroethylene. White. Size: M12 x 200 mm. Diameter: 12 mm. Pitch: 1.75 mm. SKU: 961.. BP2: Short M12 PTFE sections give a larger plastic thread for compact stand-offs, spacers and alignment posts.. BP3: Low-friction, non-conductive PTFE is useful where the fixing should remain a plastic interface.. BP4: The 200 mm fully threaded length is easy to position and can be cut carefully for shorter sections.. BP5: Use for light-duty spacing, enclosure points and custom non-metallic threaded sections; avoid over-tightening.. || PRODUCT DESCRIPTION SUMMARY: These M12 x 200 mm white PTFE threaded rods are supplied as two short, fully threaded plastic bars. The larger M12 thread gives a handable non-metallic section for compact spacer blocks, enclosure fixing points, alignment posts and custom stand-offs where a plastic rod is preferred. PTFE offers low surface friction, electrical insulation and broad chemical compatibility in suitable environments. It is softer and less rigid than metal, so the thread should be tightened carefully and matched to the application. Use with compatible M12 nuts, check thread engagement and avoid using the rods where high clamp force is needed. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M12 x 200mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 12 x 12. || Additional Specifications: Pitch_MM: 1.75. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07010-PTFEMaterial: PolytetrafluoroethyleneMaterial Reference: PTFEHead/Drive Type: Fully Threaded Rodsize: M12 x 200D: 12 mmPitch: 1.75 mmL: 200 mm