BP1: 2x Threaded Rods. 4 nuts included. Material: Polytetrafluoroethylene. Type: Fully Threaded Rods. Length: 1000 mm. Diameter: 3 mm. Pitch: 0.5 mm. SKU: 998.. BP2: PTFE gives low friction, electrical insulation and broad chemical resistance, useful where a small non-metallic threaded rod is preferred.. BP3: Fine M3 format — suited to light spacing, alignment and isolation jobs rather than high-load fastening.. BP4: Fully threaded along the full 1000 mm length, so it can be used as a long rod or cut into shorter plastic studs.. BP5: Use with correctly sized metric nuts and washers; avoid over-tightening because PTFE threads are softer than metal.. || PRODUCT DESCRIPTION SUMMARY: These M3 x 1000 mm white PTFE threaded rods are supplied as a pair of fully threaded plastic studding bars. The small 3 mm diameter and 0.5 mm pitch suit fine spacing, alignment and isolation work where a metal rod is not required. PTFE gives a low-friction, electrically insulating, non-metallic thread and broad chemical resistance for suitable environments. Because virgin PTFE is softer and less stiff than many engineering plastics or steel, it should be used for light-duty assemblies with load, thread engagement and chemical compatibility checked before use. The 1000 mm length can be cut down to shorter studs or spacer rods as needed. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M3 x 1000mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 1000 x 3 x 3. || Additional Specifications: Pitch_MM: 0.5. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07047-PTFEMaterial: PolytetrafluoroethyleneMaterial Reference: PTFEHead/Drive Type: Fully Threaded Rodsize: M3 x 1000D: 3 mmPitch: 0.5 mmL: 1000 mm