BP1: 2x fully threaded plastic rods. 4 nuts included. Material: PTFE / polytetrafluoroethylene. White. Size: M5 x 500 mm. Diameter: 5 mm. Pitch: 0.8 mm. SKU: 954.. BP2: M5 provides a broader PTFE thread for mid-size spacers, alignment bars and cut-to-length plastic studding.. BP3: Low-friction PTFE helps where nuts need to move cleanly along the threaded section during setup.. BP4: The 500 mm length can be used as a longer spacer run or divided into shorter threaded sections.. BP5: Use for light-duty spacing, non-metallic joining and custom fixture work; check the assembly before final tightening.. || PRODUCT DESCRIPTION SUMMARY: These M5 x 500 mm white PTFE threaded rods are supplied as two fully threaded plastic bars for light-duty spacing, alignment and custom plastic-studding work. M5 gives a broader thread than M3 or M4, making it easier to handle in mid-size assemblies while still being suitable for careful cut-to-length use. PTFE offers low friction, electrical insulation and broad chemical compatibility in suitable environments. It is not as rigid as metal, so the design should allow for plastic thread behaviour. Use with compatible M5 nuts and check load, temperature and chemical exposure before fitting. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M5 x 500mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 5 x 5. || Additional Specifications: Pitch_MM: 0.8. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07003-PTFEMaterial: PolytetrafluoroethyleneMaterial Reference: PTFEHead/Drive Type: Fully Threaded Rodsize: M5 x 500D: 5 mmPitch: 0.8 mmL: 500 mm