4X Scissor Lift Adapter 1/2 Inch for Use with 1/2 Inch Car Driving or Impact Wrench Tools IJA001 Lift Your Jack Very Simple: Made of very solid chrome vanadium stainless steel, easy to use with the scissor lift. Suitable for most loop or double mesh scissor seats on the market (if you are concerned about its compatibility, please check the oval size on your slots). Easy to use with the following tools:1)1/2 inch drive/hammer drills/ratchet or standard drive sockets; 2) 13/16 inch lug wrench/tire or socket or easily add half an inch adapter to each drill bit; 3), If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to a 1/2 inch card and use any cordless drill or corded drill bit with this tool and these difficult socket liftersColor: BlackMaterial: MetalSize: 8.8mm(0.35 inch) wide, 23.90mm(0.94 inch) deep, Screw length: 4.1cm, Screw size: 9.7mmPackage Contents:4 x Scissor AdapterOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement error is +/- 1-3cm.