ASSEMBLY PASTE FG is a tenacious high solids paste formulated specifically for use in the food industry. Used as a start-up lubricant the paste reduces wear to moving components during the running in period. The active compound provides instant lubrication to bearings and sliding surfaces.FEATURES NSF H1 registered (N 139900) for use in food industry Low friction coefficient provides protection during running in - prolonging component life Provides protection against scuffing during assembly Prevents seizure of threaded components enabling easy and quick dismantling Dismantled threaded components can be reused Compatible with most grease types Prevents galling and metal-on-metal damage Allows moving components to be run at full operating speed sooner without the risk of friction build-up Effective from 30C to +150C as a lubricant and up to +1100C as an anti-seize DIRECTIONSAerosol: When using the aerosol - shake well before application Spray uniformly with short intervals - When possible move the fitting parts gently while spraying NSF Registered Category : H1 (N 139900) Appearance : White Paste Carrier : Synthetic lubricating oil Specific Gravity (@ 20C) : 0.67 (aerosol) Water washout (@ 38C) : <1% (ASTM D1264) Dynamic corrosion resistance : 0:0 (EMCOR) (IP220) Solubility In Water : Insoluble Packaging : 400 ml Aerosol Based upon the present state of our knowledge and information received from our suppliers' evaluation of this product indicates that it is free from nut oils and their derivatives.STORAGEThe product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.