Description: If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 12V DC replacement which is suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications. Features: This is a normally close type electric solenoid valve, power on to open it and power off to close it. Suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications. The high quality zinc alloy valve body would hold a press up to 10kg/cm2. This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water. There is an arrow sign on valve showing flow direction, please follow the sign to connect pipes. Specifications: Valve Body: Zinc alloy Input Voltage: DC12V Type: NC(Normally Close) Pressure: 0kg/cm2 ~ 10kg/cm2 (0~142psi) Thread Size: R1 (DN25) Flow Diameter: 25mm Temperature: -5~100 Suitable for: Non-corrosive oil, water, etc Package Includes: 1 x Solenoid Valve 1This is a normally close type electric solenoid valve, power on to open it and power off to close it 2Suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications 3The high quality zinc alloy valve body would hold a press up to 10kg/cm2 4This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water 5There is an arrow sign on valve showing flow direction, please follow the sign to connect pipes