安全警告:
Warning: The Flo Control 1720C15 Check Valve is not suitable for high-pressure applications unless specifically rated for such use. Always confirm the valve's pressure rating is appropriate for your system.
Temperature Limits: Designed for cold to moderate temperature fluids. Do not use for hot fluids unless specifically indicated by the manufacturer.
Improper Installation Risk: Ensure that the valve is installed in the correct orientation to maintain the proper flow direction. A reverse installation could lead to system damage or malfunction.
Check for Leaks: After installation, ensure all connections are tight and check the valve regularly for leaks or wear, especially at the union connections and the swing mechanism.
O-Ring Seal: The True Union design uses an O-ring to create a tight seal. Make sure that the O-ring is in good condition and properly seated during installation to avoid leaks.
Do Not Over-Tighten: While installing the valve, do not over-tighten the union connections, as this can cause damage to the valve, O-ring, or threads, potentially causing leaks or failure.
Wear Protective Gear: Use protective gloves during installation to avoid injury from sharp edges on the pipes or valve components.
Do Not Block the Valve: Do not obstruct the swing mechanism within the valve, as it can lead to malfunction or failure. Always ensure the valve operates freely.
Child Safety: Keep the valve and other plumbing components out of reach of children to avoid misuse or injury.
