Micro Hydro Generator G1/2" Male Thread Water Turbine Generator Household M0XCOOTDTY Features: Low water pressure start: low flow loss waterway design, low water pressure start (0.05mpa). 1/2 outer thread: 1/2" outer thread is used for the inlet and outlet, the outer diameter is about 20mm/0.78inch. Enlarge the scroll impeller: greatly improve the power generation efficiency, and at the same time add bearings to reduce wear. Hydroelectric separation: Hydroelectric separation technology + dual magnetic coupling clutch. Wide range of applications: micro-hydrogenerators are suitable for all kinds of intelligent faucets, induction faucets, shower room lighting and sound systems, gas water heaters, solar automatic water supply controllers and others. Specification: Material: ABSVoltage: DC 12V/ 3-wire AC 0 to 20V/ DC 5V/ DC 0 to 80VSize: As ShownPeak Output Voltage: 80v (1.2mpa)Peak Output Current: ≥220ma (12v)Line Resistance: 10.5±0.5ΩInsulation Resistance: 10mΩ (dc100 Megohmmeter)Closed Peak Pressure of Outlet: 0.6mpaPeak Pressure of Outlet Opening: 1.2mpaStarting Water Pressure: 0.05mpaAxial Clearance: 0.2-1.0mmMechanical Noise: ≤55dbGenerator Life: ≥3000hPackage Includes: 1x Hydro Generatornote: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.