UNM 51122 Single Direction Thrust Ball Bearing 110x145x25mm

Axial deep groove ball bearings comprise shaft locating washers housing locating washers and ball and cage assemblies. The bearings are not self-retaining; the ball and cage assembly and bearing washers can therefore be fitted separately. In addition to the series with flat washers series are also available with spherical housing locating washers for the compensation of static angular misalignment. These designs are normally used in conjunction with seating washers. Axial deep groove ball bearings are available in single and double direction designs. Both designs can support high axial forces but cannot be subjected to radial loads. Single direction axial deep groove ball bearings can support axial forces in one direction. They do not permit angular misalignment or skewing between the shaft and housing. Features Consists of a shaft washer, a spherical housing washer and a ball cage assembly Suitable for high axial loads in one direction Cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures Can be dismantled, the bearing washers and the ball cage assembly can be mounted separately Specifications Design: With plain housing washer. Bore diameter d: 110mm. Outside diameter D: 145mm. Height H: 25mm. Outside diameter shaft washer d1: 145mm. Inner diameter housing washer D1: 112mm. Chamfer dimension washer r1,2min: 1mm. Abutment diameter shaft damin: 131mm. Abutment diameter housing Damax: 124mm. Fillet radius ramax: 1mm. Basic dynamic load rating C: 83.2kN. Basic static load rating C0: 285kN. Fatigue load limit Pu: 9.5kN. Reference speed: 2200r/min. Limiting speed: 3200r/min. Minimum load factor A: 0.52.